A patented, economical closed circuit style liquid level gage similar to
our SERIES G605, except that it is for installation where there is access
to the inside of the tank. It offers minimum protrusion from the tank and
because there are no bolt heads on the exterior face of the gage, it has
a smooth, clean profile.
The thermometer series gages have a protected sensing element that
extends well into the tank - unaffected by unrelated ambient temperatures.
Gages are furnished complete, including O-ring seals and hex nuts for
mounting. Mounting requires two .52 (13.21mm) dia. holes to match the gage
mounting centers. Mounting studs accommodate all tank walls through
.75 (19.05mm) thickness. For installations where gage is bolted to cylindrical tank
wall, conical sleeves are available. Please specify
when ordering. For gages 13.00 (330.20mm) and greater, see our SERIES G605 and G615 Bulletin.
STANDARD MATERIALS:
- Aluminum construction
- Buna N seals
- Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility
|
OPERATING CONDITIONS:
| |
|
SERIES G610
WITHOUT
THERM. |
SERIES G620
WITH THERM. |
A
CENTERS
INCHES
(mm) |
B
SIGHT
INCHES
(mm) |
C
LENGTH
INCHES
(mm) |
| G610 |
G620 |
03
(76.20) |
1.50
(38.10) |
4.62
117.35) |
| G610 |
G620 |
04
(101.60) |
2.50
(63.50) |
5.62
(142.75) |
| G610 |
G620 |
05
127.00) |
3.50
(88.90) |
6.62
(168.15) |
| G610 |
G620 |
06
(152.40) |
4.50
(114.30) |
7.62
(193.55) |
| G610 |
G620 |
07
(177.80) |
5.50
(139.70) |
8.62
(218.95) |
| G610 |
G620 |
08
(203.20) |
6.50
(165.10) |
9.62
(244.35) |
| G610 |
G620 |
09
(228.60) |
7.50
(190.50) |
10.62
(269.75) |
| G610 |
G620 |
10
(254.00) |
8.50
(215.90) |
11.62
(295.15) |
| G610 |
G620 |
12
(304.80) |
10.50
(266.70) |
13.62
(345.95) |
NOTE: The sight opening in all cases is 1.50 (38.10mm) less than mounting centers and overall length is 1.62 (41.15mm) greater than mounting centers.
HOW TO ORDER:
| Use code letters for body material: |
| A- | Aluminum gage body (standard) |
| B- | Brass gage body (optional) |
| S- | Steel gage body (optional) |
| Y- | Stainless Steel gage body (optional) |
| |
| Use Code number for seal material: |
| 1- | Buna N seals (standard) |
| 2- | Butyl seals (optional) |
| 3- | Viton A® seals (optional) |
| 4- | Ethylene Propylene seals (optional) |
| 10- | Neoprene seals (optional) |
First, specify series number, then mounting centers,
then kind of metal, and finally seal material, separating
each with a dash ( - ):
EXAMPLE: G620-05-A-1
| Where: |
Means: |
| G620 |
SERIES G620 |
| 05 |
5.00 (127.00mm) mounting centers |
| A |
Aluminum Body |
| 1 |
Buna N seals |
|
|
SERIES G610 - SIGHT ONLY
(PSI - See Eng. Std. 109)
SERIES G620
WITH DIAL THERMOMETER
|
|
PRODUCTS | TYPICAL APPLICATIONS | NEWS | VESCOR | FLODAR | HYDRA-TOOL | CONTACT US | SITEMAP
LDI Industries, Inc.
){kind=link}
){kind=link}