LDI Industries
PRODUCTS | TYPICAL APPLICATIONS | NEWS | VESCOR | FLODAR | HYDRA-TOOL | CONTACT US | SITEMAP



LUBE DEVICES : PRODUCTS : CLOSED CIRCUIT FLUID LEVEL GAGES :
FRONT MOUNT, RIGID PLASTIC 		BULLETIN F327-13  
View in PDF format  

FRONT MOUNT, RIGID PLASTIC

    STANDARD MATERIALS:
  • Tough, break resistant, transparent rigid nylon sight offers wide angle viewing
  • Aluminum end blocks and mounting
    bolts
  • Buna N seals
    OPERATING CONDITIONS:
  • Maximum working pressure up to 125 PSI (861.9 kPa) at 70°F (21.1°C)
  • Maximum temperature up to 225°F (107.2°C)
  • Suitable for use with most hydraulic and machine lubricating oils.
    CAUTION: Transparent nylon is NOT
    recommended for use with:
    Diesel Fuel, Gasoline, Ethylene Glycol (antifreeze), Polyglycols, Ethyl Alcohol, Methyl Alcohol, Methyl Ethyl Ketone (MEK), Acetone, Isopropanol, Water at 194°F (90ºC) and over, Steam boiler service.
    For these fluids, our BOROSILICATE sight glasses should be specified.
G613 SERIES


SIGHT ONLY

GT613 SERIES


THERMOMETER (50° To 300°F) (10° to 150°C)

HOW TO ORDER:
    WHEN ORDERING, SPECIFY THE FOLLOWING AFTER THE SERIES NUMBER SEPARATING EACH WITH A DASH (-):
    -A-Aluminum body (standard)
    -B-Brass body (optional)
    -1-Buna N seals (standard)
    -2-Butyl seals (optional)
    -3-Viton A® seals (optional)
    -4-Ethylene Propylene seals (optional)


    SPECIFY PIPE THREAD SIZE:
    -2-1/4-18 NPTF
    -3-3/8-18 NPTF
    -4-1/2-14 NPTF
    -5-3/4-14 NPTF

EXAMPLE: GA613-06-A-1-3

    Where: Means:
    GA613 SERIES GA613
    06 6.00 (152.40mm) mounting centers
    A Aluminum body
    1 Buna N seals
    3 3/8" NPTF
    AVAILABLE TO MAXIMUM LENGTH OF 72.00 (1828.80mm)
GA613 SERIES

CAD Drawing

WITH PIPE ADAPTERS


C D
INCHES
(mm)		 E
INCHES
(mm)
1/4-18 .56 (14.22) 1.19 (30.23)
3/8-18 .56 (14.22) 1.12 (28.45)
1/2-14 .75 (19.05) 1.12 (28.45)
3/4-14 .75 (19.05) 1.12 (28.45)

OTHER SERIES AVAILABLE - MADE TO ORDER
(MINIMUM ORDER MAY BE REQUIRED)
  • Pipe adapters with thermometer - (series GAT613)
  • Needle valves - 1/4 to 3/4 NPTF (series GNV613)
    • THREAD OPTIONS AVAILABLE PER SPECIAL ORDER: *
  • 1/2-20 UNF (Standard)
  • 1/2-13 UNC
  • 3/8-24 UNF
  • 3/8-16 UNC
  • M12 x 1.75
    		•
    A & B dimensions are common to all series.

    SERIES NUMBER A INCHES
    (mm)
    		 B INCHES
    (mm)
    GAGE SERIES NUMBER HERE, AS PER ORDERING INSTRUCTIONS
    -03 (76.20) 1.28 (32.51)
    -04 (101.60) 2.28 (57.91)
    -05 (127.00) 3.28 (83.31)
    -06 (152.40) 4.28 (108.71)
    -07 (177.80) 5.28 (134.11)
    -08 (203.20) 6.28 (159.51)
    -09 (228.60) 7.28 (184.91)
    -10 (254.00) 8.28 (210.31)
    -11 (279.40) 9.28 (235.71)
    -12 (304.80) 10.28 (261.11)


    Home | Products | Typical Applications | News
    Vescor Hydraulic Reservoirs | Flodar Hydraulic Fittings | Hydra-Tool Rotary Manifolds
    Contact Us | Sitemap

    LDI Industries, Inc.
    1864 NAGLE AVE., P.O. BOX 1810
    MANITOWOC, WI 54221
    PHONE: (920) 682-6877
    FAX: (920) 684-7210

    Copyright © Lube Devices, Inc.  
    All Rights Reserved. Privacy Statement