LIQUID LEVEL GAGE - FRONT MOUNT, RIGID POLYMER, CARD THERMOMETER, BULLETIN F327-23B : Lube Devices

LDI INDUSTRIES ’ GT623 series closed circuit liquid level gage is flush mounting, has a low profile and provides 180° viewing. This gage has a red thermometer on a white insert with dual scales of 0°F (-20°C) to +220°F (+110°C). This economical gage is suitable for many applications that require maximum fluid level visibility and temperature monitoring. For gage without thermometer, see our Series G623 on Bulletin F327-23A.

STANDARD MATERIALS:

Tough, break resistant, transparent rigid polymer sight offers wide angle viewing
Steel, zinc plated mounting bolts
Buna N seals
Black powder coated steel guard

OPERATING CONDITIONS:

Maximum working pressure up to 50 PSIG (345 kPa) at 70°F (21.1°C)
Maximum temperature up to 212°F (100°C)
Suitable for use with most hydraulic and machine lubricating oils.

NOTE:Torque mounting bolts to 80 inch lbs. (9.04 N·m).

WITH OPTIONAL GUARD

HOW TO ORDER

WHEN ORDERING, SPECIFY THE FOLLOWING AFTER THE SERIES NUMBER, SEPARATING EACH WITH A DASH (-):
-1-      Buna N seals (standard)
-3-      Viton A® seals (optional)
M      M12 X 1.75 bolts (optional)
G      Guard (optional)

EXAMPLE:G623-05-PG-1C

Where:	Means:
GT623	Series GT623
05	5.00(127.00mm) std mounting centers
P	Polymer body
G	Guard
1	Buna N seals
C	½-13 UNC bolts, std

CAUTION: NOT RECOMMENDED FOR USE WITH: Alcohol or Steam condensate. For these fluids, our gages with BOROSILICATE sight glass and appropriate seals should be specified.