LDI Industries
PRODUCTS | TYPICAL APPLICATIONS | NEWS | VESCOR | FLODAR | HYDRA-TOOL | CONTACT US | SITEMAP



LUBE DEVICES : PRODUCTS : CLOSED CIRCUIT FLUID LEVEL GAGES :
FRONT MOUNT, DIAL PROBE THERMOMETER IN WELL 		BULLETIN F327-45  
View in PDF format  

FRONT MOUNT, DIAL PROBE THERMOMETER IN WELL


This gage can be installed from the front of the reservoir when wall is heavy enough to tap .500-20UNF thread or from the inside to tighten nuts.

Exclusive design with a well protecting the sensing probe-allows removal of thermometer without loss of fluid. Easy reading dual scale dial thermometer has probe extending deep into reservoir and is not affected by ambient temperatures.

Furnished complete - ready for installation. All "O" rings and hex nuts included.

Available to 142.00 (3606.80mm) mounting centers per special order.

    STANDARD MATERIALS:
  • Aluminum Construction
  • Buna N seals
  • Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility
    OPERATING CONDITIONS:
  • Maximum working pressure up to 125 PSI
  • (861.9 kPa) at 150°F (65.6°C), no corrosion
HOW TO ORDER:
    WHEN ORDERING, SPECIFY THE FOLLOWING AFTER THE SERIES NUMBER, SEPARATE EACH WITH A DASH (-). SELECT MOUNTING CENTERS. 3.00 (76.20mm) TO 12.00 (304.80mm) AVAILABLE FROM STOCK.
    -A-Aluminum gage body (standard)
    -B-Brass gage body (optional)
    -S-Steel gage body (optional)
    -Y-Stainless steel gage body (optional)
    -1-Buna N seals (standard)
    -2-Butyl seals (optional)
    -3-Viton A® seals (optional)
    -4-Ethylene propylene seals (optional)
    -5-Silicone seals (optional)

    EXAMPLE: G645-10-A-1

      Where: Means:
      G645 SERIES G645
      10 10.00 (254.00mm) CENTERS
      A ALUMINUM GAGE BODY
      1 BUNA N SEALS

SERIES NUMBER A
CENTERS
INCHES (mm)		 B
SIGHT
INCHES (mm)		 C
LENGTH
INCHES (mm)
G645 05
(127.00)		 3.50
(88.90)		 6.62
(168.15)
G645 08
(203.20)		 6.50
(165.10)		 9.62
(244.35)
G645 10
(254.00)		 8.50
(215.90)		 11.62
(295.15)
G645 12
(304.80)		 10.50
(266.70)		 13.62
(345.95)

G645 PATENTED

CAD Drawing

MODIFICATIONS AVAILABLE MADE TO ORDER - CONSULT OUR FACORY



Home | Products | Typical Applications | News
Vescor Hydraulic Reservoirs | Flodar Hydraulic Fittings | Hydra-Tool Rotary Manifolds
Contact Us | Sitemap

LDI Industries, Inc.
1864 NAGLE AVE., P.O. BOX 1810
MANITOWOC, WI 54221
PHONE: (920) 682-6877
FAX: (920) 684-7210

Copyright © Lube Devices, Inc.  
All Rights Reserved. Privacy Statement