FRONT MOUNTING LIQUID LEVEL GAGES WITH AND WITHOUT THERMOMETER, BULLETIN F327-5 / -15 : Lube Devices

LUBE DEVICES : PRODUCTS : CLOSED CIRCUIT FLUID LEVEL GAGES :
FRONT MOUNTING LIQUID LEVEL GAUGES - WITH AND WITHOUT THERMOMETER

BULLETIN F327-5 / -15
View in PDF format

FRONT MOUNTING LIQUID LEVEL GAUGES - WITH AND WITHOUT THERMOMETER

A patented dual purpose closed circuit style liquid level gage that provides both instant and positive visual check of fluid levels and temperature in either hydraulic or oil reservoirs. Maximum sight protection is provided by the heavy precision machined bar stock body. Thermometer series gages have a protected sensing element that extends well into the tank - unaffected by unrelated ambient temperatures. Gages are furnished complete, including O-ring seals and hex nuts for mounting. A .06 (1.52mm) alignment adjustment at each stud facilitates mounting. This gage can be installed from the outside on 1/2-20UNF tapped holes when reservoirs do not have access to the interior and tank wall thickness permits tapping. For installations where gage is bolted to cylindrical tank wall, conical sleeves are available. Please specify when ordering. Front mounting gages can be made to order with mounting centers up to 142.00 (3606.80mm) in 1.00 (25.40mm) increments. Stainless steel dial thermometer: 1.38 (35.05mm) dia. dual scale Fahrenheit (50° to 300°), Centigrade (10° to 150°). For back mount gages, see our SERIES G610 and G620 on Bulletin F327-10/-20.

STANDARD MATERIALS:

Aluminum construction
Buna N seals
Borosilicate glass with redline on white background for distinct level reading and maximum fluid compatibility

OPERATING CONDITIONS:

See ENG. STD. 109

SERIES G605 - SIGHT ONLY (PSI - See Eng. Std. 109)	SERIES G615 WITH DIAL THERMOMETER (Maximum working pressure - 125 PSI (863 kPa))

HOW TO ORDER:

Use code letters for body material:		Use code numbers for seal material:
A-	Aluminum gage body (standard)	1-	Buna N seals (standard)
B-	Brass gage body (optional)	2-	Butyl seals (optional)
S-	Steel gage body (optional)	3-	Viton A® seals (optional)
Y-	Stainless steel gage body (optional)	4-	Ethylene Propylene seals (optional)
		10-	Neoprene seals (optional)
First, specify series number, then mounting centers, then kind of metal, and finally seal material, separating each with a dash ( - )

EXAMPLE: G615-05-A-1

Where:	Means:
G615	SERIES G615
05	5.00 (127.00mm) mounting centers
A	Aluminum gage body
1	Buna N seals

NOTE: The sight opening in all cases is 1.50 (38.10mm) less than mounting centers and overall length is 1.62 (41.15mm) greater than mounting centers. Gages with 13.00 (330.20mm) and greater mounting centers are furnished with spacer sleeves to space gage from tank - allowing for bowing of the tank wall in larger reservoirs. Center mounting kits are furnished with gages 48.00 (1219.20mm) and greater mounting centers.

LONGER CENTER LENGTHS UP TO 142" ARE AVAILABLE "SPECIAL MADE TO ORDER"

SERIES G605 WITHOUT THERM.	SERIES G615 WITH THERM.	A CENTERS INCHES (mm)	B SIGHT INCHES (mm)	C LENGTH INCHES (mm)
G605	G615	03 (76.20)	1.50 (38.10)	4.62 (117.35)
G605	G615	04 (101.60)	2.50 (63.50)	5.62 (142.75)
G605	G615	05 (127.00)	3.50 (88.90)	6.62 (168.15)
G605	G615	06 (152.40)	4.50 (114.30)	7.62 (193.55)
G605	G615	07 (177.80)	5.50 (139.70)	8.62 (218.95)
G605	G615	08 (203.20)	6.50 (165.10)	9.62 (244.35)
G605	G615	09 (228.60)	7.50 (190.50)	10.62 (269.75)
G605	G615	10 (254.00)	8.50 (215.90)	11.62 (295.15)
G605	G615	11 (279.40)	9.50 (241.30)	12.62 (320.55)
G605	G615	12 (304.80)	10.50 (266.70)	13.62 (345.95)


LDI Industries, Inc. 1864 NAGLE AVE., P.O. BOX 1810 MANITOWOC, WI 54221 PHONE: (920) 682-6877 FAX: (920) 684-7210	Copyright © Lube Devices, Inc. All Rights Reserved. Privacy Statement