LIQUID INLINE FILTERS - DRAIN PLUG, BULLETIN F1297-3 : Lube Devices

LUBE DEVICES : PRODUCTS : VENTS, BREATHERS, FILTERS :
RELIEF VENTS / SAMPLING VALVES

BULLETIN F1297-3
View in PDF format

LIQUID INLINE FILTERS - DRAIN PLUG

Use in liquid lines where dirt or particles could cause clogging, such as oil going to a spray valve. Inline Cap can be taken off to clean filter without dismantling unit from the line.

STANDARD MATERIALS:

Brass construction
Buna N seals
40 micron filter

OPERATING CONDITIONS:

Maximum working pressure up to 150 PSI (1034 kPa)
Maximum temperature up to 175 degree F (79.4 C)

CATALOG NUMBER	A-PTF	B INCHES (MM)
LF201-02	1/4-18	2.38 (60.45)
LF201-03	3/8-18	2.62 (66.55)

MAGNETIC DRAIN PLUG

Use as drain plug at lowest location in sump. Magent will attract and hold magnetic particles that may be in fluid line.

STANDARD MATERIALS:

Steel construction

OPERATING CONDITIONS:

Maximum working pressure up to 150 PSI (1034 kPa)
Maximum temperature up to 175 degree F (79.4 C)

MODIFICATIONS AVAILABLE - MADE TO ORDER - CONSULT OUR FACTORY (MINIMUM ORDER MAY BE REQUIRED)

CATALOG NUMBER	A-NPT	B INCHES (MM)	C INCHES (mm)
MDP101	1/8	.43 (10.92)	.12 (3.05
MDP102	1/4	.69 (17.53)	.28 (7.11)
MDP103	3/8	.69 (17.53)	.31 (7.87)
MDP104	1/2	.81 (20.57)	.20 (5.08)
MDP105	3/4	.75 (19.05)	.22 (5.59)
MDP106	1	.75 (19.05)	.18 (4.57)


LDI Industries, Inc. 1864 NAGLE AVE., P.O. BOX 1810 MANITOWOC, WI 54221 PHONE: (920) 682-6877 FAX: (920) 684-7210	Copyright © Lube Devices, Inc. All Rights Reserved. Privacy Statement