RESERVOIR - MANUAL MULTIPLE FEED, BULLETIN F587-1 : Lube Devices

LUBE DEVICES : PRODUCTS : LUBRICATORS/DISPENSERS :
RESERVOIR - MANUAL MULTIPLE FEED

BULLETIN F587-1
View in PDF format

RESERVOIR - MANUAL MULTIPLE FEED

Multiple feed, large capacity reservoirs with central mounting shank provide for controlled lubrication for up to 30 points from one location. Manually operated toggle lever at the top of reservoir controls on/off full flow of oil to valves. Valve drip off feed rate is individually set at each valve. Large reservoir provides 360° viewing at a glance.
Vent on vertical plane so dust and dirt cannot enter the reservoir. Exclusive patented compact manifold design allows for easy removal of any of the valves.
Units with odd number of feeds will be furnished with greater number of feeds to the right side unless otherwise specified.
For outdoor or damp applications - please specify anodized.
For replacement feeds, please order P/N 352890.

STANDARD MATERIALS:

Aluminum construction
Buna N seals
Class 'B' molded water resistant coil
Break resistant, colorless, transparent polymer.

OPERATING CONDITIONS:

Maximum working temprature up to 140°F (60°C).
Ratings are at atmospheric pressure

HOW TO ORDER:
After catalog number, specify number of feeds and voltage / hertz required, separating each with a dash, (-).

-02	Specify 02 through 30 feeds. (2 feeds are standard)
-30

EXAMPLE: RDM103-02

Where:	Means:
RDM103	Series RDM103 - (1 pint (.47 liter) capacity reservoir)
02	2 feeds (standard)

CATALOG NUMBER	CAPACITY	A INCHES (mm)	B INCHES (mm)
POLYMER	CAPACITY	A INCHES (mm)	B INCHES (mm)
RDM101	9 ounces (266.16 milliliter)	3.00 (76.20)	8.50 (215.90)
RDM102	12 ounces (354.88 milliliter)	3.00 (76.20)	9.50 (241.30)
RDM103	1 pint (.47 liter)	3.50 (88.90)	9.50 (241.30)
RDM104	1 quart (.95 liter)	4.25 (107.95)	10.69 (271.53)
RDM105	1/2 gallon (1.9 liter)	5.50 (139.70)	12.75 (323.85)
RDM106	1 gallon (3.8 liter)	5.50 (139.70)	17.75 (450.85)

MODIFICATIONS AVAILABLE MADE TO ORDER - CONSULT OUR FACTORY
(MINIMUM ORDER MAY BE REQUIRED)

FEEDS	-02 INCHES (mm)	-03 INCHES (mm)	-04 INCHES (mm)	-05 INCHES (mm)	-06 INCHES (mm)	-10 INCHES (mm)	-20 INCHES (mm)	-30 INCHES (mm)
L1	2.19 (55.62)	2.94 (74.68)	2.94 (74.68)	3.69 (93.73)	3.69 (93.73)	5.19 (131.83)	8.94 (227.08)	12.69 (322.33)
L2	4.38 (111.25)	5.12 (130.05)	5.88 (149.35)	6.62 (168.15)	7.38 (187.45)	10.38 (263.65)	17.88 (454.15)	25.38 (644.65)


LDI Industries, Inc. 1864 NAGLE AVE., P.O. BOX 1810 MANITOWOC, WI 54221 PHONE: (920) 682-6877 FAX: (920) 684-7210	Copyright © Lube Devices, Inc. All Rights Reserved. Privacy Statement