PRECISION METERING PUMP - AIR OPERATED, BULLETIN F1837-1 : Lube Devices

LUBE DEVICES : PRODUCTS : POSITIVE DISPLACEMENT METERING PUMPS :
PRECISION METERING PUMP - AIR OPERATED

BULLETIN F1837-1
View in PDF format

PRECISION METERING PUMP - AIR OPERATED

LDI INDUSTRIES' air operated metering pumps are unique in that each outlet/feed is an individual positive displacement pump. These pumps are ideal for dispensing precise easily adjustable volumes of a variety of fluids including: oils or grease for lubrication, inks, dyes, chemical additives and cutting fluids. The factory should be consulted before using with high water base fluids. The air operated metering pumps are positive displacement, self priming with up to 27 InHg (686mmHg)and will operate in any position. They are available in 1 to 15 feeds for oil or 1 to 5 feeds for grease with each feed independently and externally adjustable from 0 to .012 cu. in. (0 to .197 cu. cm.) by a micrometer thread .025 (.572mm) pitch. A patented feature allows additional pumps (AMP100) to be easily added to a PMP100-02 or more pump banks. The air operated metering pumps are intended for "on command", higher output pressure applications where a compressed air supply of 25 to 125 PSIG (172.5 to 862.5 kPa) is available. All feeds will actuate at the same time "on command" by using compressed air or other fluids through LDI Industries' 3-way Solenoid Valve (item no. 832160) actuated by LDI Industries' Repeat Cycle Timers (item no. 832150 or 833380). LDI Industries' R100 series filtered reservoirs (bulletin F357-7) are ideal for oil applications. Grease applications should use LDI Industries' GCA100 or GCA200 Grease Cartridge Adapters (bulletin F1867-1) or GR75 or GR168 Grease Reservoirs (bulletin F1867-2).

STANDARD MATERIALS: Aluminum, Brass, Steel, Acrylic Buna N & Viton seals	OPERATING CONDITIONS: Maximum operating temperature up to 120°F (48.9°C) Minimum working temperature 0°F (-17.7°C), oil Minimum working temperature 32°F (0°C), grease Maximum output pressure up to 250 PSIG (1725 kPa)
PATENT NUMBERS: 5,876,189 and 5,881,773

How to Order:
After PMP100 catalog number, specify number of feeds required, separated by a dash (-). Specify 1 through 15 feeds-01/-15

EXAMPLE: PMP100-05 ----- 5 Feed (shown)
*TO "ADD A PUMP ", to existing multiple feed bank, order catalog number AMP100(Not used with single feed P/N PMP100-01)


LDI Industries, Inc. 1864 NAGLE AVE., P.O. BOX 1810 MANITOWOC, WI 54221 PHONE: (920) 682-6877 FAX: (920) 684-7210	Copyright © Lube Devices, Inc. All Rights Reserved. Privacy Statement