Horizontal Series Reservoir - Non-JIC With Welded Top (Small)
View Larger
Additional Product Information
The small non-JIC type horizontal steel reservoirs with welded on top have an internal baffle extending from one end with clearance above and on the return side of the reservoir. The reservoirs have a low profile flat bottom with mounting feet outward from the ends. Clean-out access is provided from each end of the reservoir to facilitate cleaning on both sides of the baffle. Each reservoir is supplied with a sight gage, filler breather and access covers.
Standard Features:
- Reservoir capacities ranging from 10 to 40 gallons
- Partial Internal baffle positioned lengthwise within the reservoir
- Welded on top
- Reservoir bottom is flat
- (1) 3/4 inch NPT drain
- Clean-out access on each end
- Two 6.00 inch diameter covers
- Reservoirs larger than 10 gallons have reinfored tops
- Exterior painted with a LDI gray primer
- Interior coated with rust preventative oil
- 5 inch back mount GT623 Series sight gage
- Card thermometer, dual scale 0°F to 220°F and -20°C to 110°C
- No mounting holes provided for filler breather installation
Sight gage and filler breather provided loose with reservoir
Standard Materials:
- Carbon steel construction
- Buna N seals
- Molded, transparent nylon sight gage with black powder coated steel guard
- Zinc plated fill cap with nylon strainer basket
Caution:
- Reservoirs are not designed for internal positive or negative pressure applications. For these applications, consult the factory.
Temperature Rating
- Industry accepted design practice for hydraulic systems limits maximum operating temperature to 180° F (82° C), but materials used for fabrication of the reservoirs are capable of operating between -40° and 212° F (-40° and 100° C).
Product Options
Common Modifications Available
- Unpainted (-UP)
- Sight gage with aluminum construction (-AG)
Custom Modifications Available
- Suction ports, lines and filters
- Return ports, down pipes and diffusers
- Sight gage locations and features
- Machined mounting plates or blocks
- Containment stands and trays
- Modifications to Internal baffle
- Modifications to access-openings
- Heaters and level switches
- Top coat finish
- Component installation and packaging
Minimum quantities may apply.
Related Products
LDI also offers other horizontal style reservoirs varying in construction and material.
LDI also offers reservoir types other than horizontal styles to meet a range of applications.
LDI specializes in custom reservoirs with experience designing and fabricating reservoirs of all shapes and sizes to meet our customers' specific needs.
Our capabilities in fabrications go beyond just reservoirs and sheet metal construction. Custom fabrication of brackets, frames and structures is also part of our business supported by our experience in design and manufacture of related products.
CAD Files