T100 Series Horizontal Reservoir - Non JIC With Bolt On Top

The non-JIC type horizontal steel reservoirs come fully assembled with sight gage, filler breather and bolt on top. The larger capacity reservoirs in this series utilize a baffle that reduces direct recirculation of fluid returning to the reservoir. The design incorporates a raised, flat bottom profile with mounting feet and drain connections beneath the reservoir body. No cover gasket is used on this design.

Standard Features:

• Reservoir capacities ranging from 1 to 15 gallons
• Internal baffle (reservoirs capacities > 2 gallons only)
• Removable, bolt on top suitable for mounting motors, pumps and other components
• Reservoir bottom is flat
• 1/2 inch NPT drain(s)
• Exterior painted with a LDI gray primer
• Interior coated with rust preventative oil
• Back mount G610 Series sight gage
• No cover gasket is utilized

Standard Materials:

• Carbon steel construction
• Buna N seals
• Aluminum sight gage
• Zinc plated fill cap with stainless steel strainer basket

Caution:

• Reservoirs are not designed for internal positive or negative pressure applications. For these applications, consult the factory.
• Metal contact between cover and reservoir body seal reservoir from outside contaminants. Excessive splashing of fluid or overfill may lead to fluid leakage past the metal to metal barrier.