Style C, T-Shaped Reservoirs

View Larger

The Style C, T-Shaped Series provides users with a vertical reservoir straddled by platforms for mounting system components. The reservoir cover is hinged for convenient access to the inside of the reservoir. The reservoir and platforms are fully supported by and welded to a skid allowing for most system assemblies to be completed remotely and then transported to another location for drop in installation.


Standard Features:

  • Reservoir capacities ranging from 10 to 400 gallons
  • Channel gasket installed
  • Reservoir covers are secured with multiple T-handle latches. On reservoirs larger than 60 gallons the cover is supported by chain when opened.
  • Reservoir bottom is flat
  • (1) 3/4 inch NPT drain (plugged)
  • Platform base plate thicknesses range from 7 Ga to .50 inch
  • 3 inch wide kick plate on each end of skid
  • Exterior painted with a LDI gray primer
  • Interior coated with rust preventative oil
  • 5 inch back mount G1620 Series sight gage (less than 300 gallons)
  • 10 inch back mount G1620 Series sight gage (300 gallon and above)
  • Card thermometer integral to sight gage, dual scale 0° to 220°F and -20° to 110°C graduations
  • 5201 filler breather

Sight gage, filler breather and T-handles provided loose with shipment

Standard Materials:

  • Carbon steel reservoir
  • Buna N seals
  • Aluminum sight gage
  • Zinc plated fill cap with nylon strainer basket

Caution:

  • Reservoirs are not designed for internal positive or negative pressure applications. For these applications, consult the factory.

Temperature Rating

  • Industry accepted design practice for hydraulic systems limits maximum operating temperature to 180° F (82° C), but materials used for fabrication of the reservoirs are capable of operating between -40° and 250° F (-40° and 121° C).

Product Options

Common Modifications Available

  • Containment lip(s) in place of kick plate (add CL to part number)
  • Stainless Steel Construction
  • Unpainted (add -UP to part number)

Custom Modifications Available

  • Suction ports, lines, strainers and filters
  • Return ports, down pipes and diffusers
  • Sight gage locations and features
  • Machined mounting plates or blocks
  • Modifications to Internal baffle(s)
  • Heaters and level switches
  • Top coat finish
  • Component installation and packaging

Minimum quantities may apply

Related Products

LDI offers other product series with platform and reservoir combinations that are supported with a skid.

LDI also offers product series without integrated skid or adjacent platform to satisfy the requirements of a range of applications.

LDI specializes in custom reservoirs with experience designing and fabricating reservoirs of all shapes and sizes to meet our customers' specific needs.

Our capabilities in fabrications go beyond just reservoirs and sheet metal construction. Custom fabrication of brackets, frames and structures is also part of our business supported by our experience in design and manufacture of related products.

 

LOCATIONS:

LDI - Corporate  Click for map LDI   Click for map
Precision Machining & Assembly Fabrication & Assembly
1864 Nagle Ave. 12901 Jim Dhamer Dr.
Manitowoc, WI  54220 Huntley, IL  60142
   
PH: 920.682.6877                         
FAX: 920.684.7210                         
sales@ldi-industries.com                    

 

ABOUT OUR EMPLOYEES

Our talented team of degreed and professionally certified Engineers, Quality Assurance, Production and Customer Service staff have many years of experience in the industry.  Their attention to detail and ability to collaborate with our clients to solve their problems is reflected in the 50+ years we have been in business.

WE'RE HERE TO HELP

Customer Service: 

920.682.6877, option 4

Cross Reference