Style F, L-Shaped Reservoirs

The Style F, L-Shaped Series provides users with a vertical reservoir and an adjacent platform for mounting system components. The reservoir cover is partially hinged for convenient access to the inside of the reservoir, but also has a welded section designed for mounting accessories directly to the top of the reservoir. The reservoir and platform are fully supported by and welded to a skid allowing for most system assemblies to be completed remotely and then transported to another location for drop in installation.

Standard Features:

• Reservoir capacities ranging from 80 to 600 gallons
• Channel gasket installed
• Reservoir covers are secured with multiple T-handle latches and supported by chain when opened
• Reservoir bottom is flat
• (1) 3/4 inch NPT drain (plugged)
• Platform base plate thicknesses range from .38 to .50 inch
• 3 inch wide kick plate on front of skid
• Exterior painted with a LDI gray primer
• Interior coated with rust preventative oil
• 5 inch back mount G1620 Series sight gage (less than 300 gallons)
• 10 inch back mount G1620 Series sight gage (300 gallon and above)
• Card thermometer integral to sight gage, dual scale 0° to 220°F and -20° to 110°C graduations
• 5201 filler breather

Sight gage, filler breather and T-handles provided loose with shipment

Standard Materials:

• Carbon steel reservoir
• Buna N seals
• Aluminum sight gage
• Zinc plated fill cap with nylon strainer basket

Caution:

• Reservoirs are not designed for internal positive or negative pressure applications. For these applications, consult the factory.