Style 2 Series Reservoir - DIN Type With Underbody Clearance
View Larger
Additional Product Information
The Style 2 Series DIN type steel reservoir is constructed with a recessed welded top and clean-out access on each end. The reservoir has an elevated bottom sloped toward front with bottom exit drain port. Each reservoir is supplied with a sight gage, filler breather and access covers.
Standard Features:
- Reservoir capacities ranging from 20 to 500 gallons
- Internal baffle positioned front to back with circulation passages
- Clean-out access on each end
- Reservoir bottom sloped toward front
- Straight thread, SAE dash 12 or dash 16 o-ring drain port - bottom exit
- Recessed top cover/containment tray
- Exterior painted with a LDI gray primer
- Interior coated with rust preventative oil
- 5 inch front mount GT623 Series sight gage (less than 100 gallons)
- 10 inch front mount G1615 Series sight gage (100 gallon and above)
- Card thermometer integral to sight gage, dual scale 0° to 220°F and -20° to 110°C graduations
- 5275 riser for mounting 5201 filler breather
Sight gage and filler breather provided loose with reservoir
Standard Materials:
- Carbon steel construction
- Cast aluminum access covers
- Buna N seals
- Aluminum sight gage
- Zinc plated fill cap with nylon strainer basket
Caution:
- Reservoirs are not designed for internal positive or negative pressure applications. For these applications, consult the factory.
Temperature Rating
-
Industry accepted design practice for hydraulic systems limits maximum operating temperature to 180° F (82° C), but materials used for fabrication of the reservoirs are capable of operating between -40° and 250° F (-40° and 121° C).
Product Options
Common Modifications Available
Custom Modifications Available
-
Suction ports, lines and filters
-
Return ports, down pipes and diffusers
-
Sight gage locations and features
-
Machined mounting plates or blocks
-
Mounting studs
-
Clean-out geometry and locations
-
Modifications to Internal baffle
-
Heaters and level switches
-
Top coat finish
-
Component installation and packaging
Minimum quantities may apply.
Related Products
LDI offers other DIN style reservoirs that vary in construction and porting.
LDI also offers reservoir types other than DIN styles to meet a range of applications.
LDI specializes in custom reservoirs with experience designing and fabricating reservoirs of all shapes and sizes to meet our customers' specific needs.
Our capabilities in fabrications go beyond just reservoirs and sheet metal construction. Custom fabrication of brackets, frames and structures is also part of our business supported by our experience in design and manufacture of related products.
CAD Files