Style 4 Series Reservoir - DIN Type With Low Profile

The Style 4 Series DIN type steel reservoir is constructed with a recessed welded top and clean-out access on each end. A baffle positioned front to back with circulation passages divides the reservoir into two chambers.The reservoir has a low profile bottom sloped toward front wall with a drain port exiting out the front.  Mounting feet our located outward from the ends. Each reservoir is supplied with a sight gage, filler breather and  access covers.

Standard Features:

• Reservoir capacities ranging from 20 to 200 gallons
• Internal baffle positioned front to back with circulation passages
• Clean-out access on each end
• Reservoir bottom sloped toward front
• Straight thread, SAE dash 12 or dash 16 o-ring drain port - bottom exit
• Recessed top cover/containment tray
• Exterior painted with a LDI gray primer
• Interior coated with rust preventative oil
• 5 inch front mount GT623 Series sight gage (less than 100 gallons)
• 10 inch front mount G1615 Series sight gage (100 gallon and above)
• Card thermometer integral to sight gage, dual scale 0° to 220°F and -20° to 110°C graduations
• 5275 riser for mounting 5201 filler breather

Sight gage and filler breather provided loose with reservoir

Standard Materials:

• Carbon steel construction
• Cast aluminum access covers
• Buna N seals
• Aluminum sight gage
• Zinc plated fill cap with nylon strainer basket

Caution:

• Reservoirs are not designed for internal positive or negative pressure applications. For these applications, consult the factory.