SGC Series Front Mount Sight Gage - Front Viewing With Card Thermometer & Check Valves
Additional Product Information
The SGC Series front mount closed circuit sight gages provide front viewing of the fluid level through a clear sight glass. Integral to the sight gage is a thermometer contained within a white colored card for direct reading of the fluid temperature. The white colored card helps draw eye contact to the fluid level quickly. Check valves integral to mounting studs allow for removal of sight gage without having to drain the reservoir.
Standard Features:
- Centerline lengths of 5 and 10 inches
- Front mount
- 1.00 x .95 inch body machined from extruded aluminum bar stock
- Fluid level visible from front of gage (.75 inches wide)
- Clear sight glass
- Card thermometer, dual scale 0° to 220°F and -20° to 110°C graduations
- Mounting studs accommodate reservoir wall thicknesses up to .56 inches
- Suitable for use with most hydraulic and machine lubricating oils
Access to inside of reservoir is required to mount studs with integral check valves.
Standard Materials:
- Aluminum & Brass Construction
- Buna N seals
- Borosilicate glass sight
Caution:
- Not recommended for use with water, steam, acidic fluids, caustic fluids and volatile fluids.
Pressure Rating
- 20 psi (138 kPa) maximum working pressure at 150°F (65°C)
Related Products
The G608 Series provides an alternative in both mounting and shut-off characteristics while still allowing removal of the sight gage with only minimal loss of fluid.
When sight gage removal is not required with a fluid filled reservoir, refer to the more tradition sight gages for monitoring fluid level.
Your fluid storage system is not complete until you define the reservoir. Off-the-shelf or customized to your specifications, consider LDI your source for: