R100 Series, Gravity Feed Reservoir without Flow Control

View Larger

Additional Product Information

The R100 Series of gravity feed reservoirs without flow control are ideal for use as make-up or replenishing reservoirs. They can be installed in most cases to serve both as an oil cup to maintain oil level and as an oil gage to provide 360° visual check of fluid level and condition. Fill cap with side vent minimizes the possibility of dust and dirt entering the reservoir. Reservoirs can be disassembled for occasional cleaning.

Some Gravity Feed Reservoirs also come with a low level switch.  This low level switch provides a electrical interface to activate a low reservoir level alarm or monitor used to determine when to refill the reservoir.

Standard Features - Gravity Feed w/o Flow Control :

  • 1/8, 1/4, 3/8 or 1/2 inch NPTF male connections
  • Available in either break resistant colorless transparent polymer or borosilicate glass for fluid compatibility and thermal shock

Standard Materials:

  • Aluminum construction
  • Buna N seals
  • Break resistant colorless transparent polymer
  • Borosilicate glass for fluid compatibility and thermal shock

Standard Features - Gravity Feed with Filter - no Flow Control:

  • 1/4, 3/8, 1/2 NPTF or .625 UNF inch male shank
  • Pipe or bracket mount styles available

Standard Materials:

  • Aluminum construction
  • Buna N seals
  • Break resistant colorless transparent polymer
  • 100 Mesh stainless steel filter
  • Some sizes have a brass shank

Standard Features - Gravity Feed with Filter and Low Level Switch:

  • 1/4, 3/8, 1/2 NPTF or .625 UNF inch male shank
  • Pipe or bracket mount styles available
  • DPDT, 10A, 120V, 60Hz relay for switch is available

Standard Materials:

  • Aluminum construction
  • Buna N seals
  • Break resistant colorless transparent polymer
  • 100 Mesh stainless steel filter
  • 10 VA switch closes on descending level
  • Some sizes have a brass shank

 

Temperature & Pressure Ratings

  • Polymer maximum working temperature up to 140°F (60°C)

  • Glass maximum working temperature up to 250°F (121°C)

  • Ratings are at atmospheric pressure.

Product Options

Custom Modifications Available

 

Minimum quantities may apply.

Related Products

For those applications requiring flow control consider the following LDI product:

 

LOCATIONS:

LDI - Corporate  Click for map LDI   Click for map
Precision Machining & Assembly Fabrication & Assembly
1864 Nagle Ave. 12901 Jim Dhamer Dr.
Manitowoc, WI  54220 Huntley, IL  60142
   
PH: 920.682.6877                         
FAX: 920.684.7210                         
sales@ldi-industries.com                    

 

ABOUT OUR EMPLOYEES

Our talented team of degreed and professionally certified Engineers, Quality Assurance, Production and Customer Service staff have many years of experience in the industry.  Their attention to detail and ability to collaborate with our clients to solve their problems is reflected in the 50+ years we have been in business.

WE'RE HERE TO HELP

Customer Service: 

920.682.6877, option 4

Cross Reference